What to Evaluate, before Purchase, concerning the Mechanics of a Rosin Press Machine
I am confident that the word ‘rosin’ is one you have come across severally, especially if you have dealt with varnishes and adhesives before. Have you ever come across a certain translucent golden yellow sticky glue-like fluid? This may not be an accurate description of what I’m talking about, but it will do for now. Well, I will have you know that which I speak of is rosin. As unpleasant as it may seem to some, rosin has extensive uses in making adhesives, inks and treating the bows of stringed instruments such as violins. Being that rosin has certain financial advantages, you can start reaping form it by purchasing a machine to aid in its extraction. You will go out to look for a rosin press machine, and you won’t have to look far to find one. Using this article, you will figure out what mechanical factors need to be adhered to when picking a rosin press machine.
First on your list should be the matter of the rosin press machine plates. You need to have long and narrow rectangular plates if you want to maximize the production from the extraction procedure. For starters, you will enhance the perimeter to area ratio by using a rectangular plate. Having a greater perimeter means that there will be more room through which the rosin can escape once pressed. By using narrow plates, the rosin pressed out will move through a smaller distance from the center of the bag with the material to the ages. This means that the rosin will travel a shorter distance once squeezed out hence fewer chances of degradation due to heat.
Next up is the subject of pressure to be addressed. Many tend to think that the more pressure they put in, the better the rosin. This is a misconception since the pressure is affected by many things including material being pressed, humidity, and quality of the growth process and age of the material. Excess pressure can result in plenty of lipids and unwanted pigments ending up in the rosin which reduces quality. You should go for a rosin press machine with solid construction in terms of sustaining pressure within the desired range throughout the extraction process.
Take time to think about how the heat will affect your rosin quality. Heat needs to be looked into keenly for its needed to enhance extraction while an excess of it will cause more harm than good. To get this right, there must be even distribution of heat. Heat cuts down on the viscous effect, hence allowing the rosin to flow. The point at which you position the heating coil in the plates will dictate heat distribution. Consequently, to ensure that all works out for you, ascertain the heating coil placements before you buy the rosin press machine.